Did you know that you run the risk of freezing your plumbing pipes if you have any rooms that are not heated? This can sometimes come unexpectedly because you expect the adjoining rooms of your house to stay warm enough. For this and other plumbing tips, read the rest of this article.
If you are paying someone else to do the plumbing in your home be sure that they are licensed in your state to do that work. Some people who have little or no knowledge of plumbing will try to pass themselves off as a pro. So you can see the importance of checking to see if your plumber is licensed. You should also see if you can find positive testimonials about the plumbers work.
Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.
Make sure everyone that lives in your house knows where to find and use the main water shut off valve in case there is a burst pipe emergency. This is especially important if you live in an area where your pipes may freeze. Take a moment to show your family members where the valve is and how to properly shut it off.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.
In conclusion, it is important to know what to watch out for so that you do not find yourself underwater when it comes to plumbing issues. Use the great advice provided to you in this article and you will be glad that you took the extra few minutes to further your knowledge.